REAR BUMPER REASSEMBLY


  1. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (w/o Performance Rod)

    A01171Z

    1. Install the rear bumper reinforcement with the 6 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  2. INSTALL NO. 2 REAR BUMPER REINFORCEMENT (w/ Performance Rod)

    A0119RT

    1. Engage the 2 guides and install the No. 2 rear bumper reinforcement.

  3. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (w/ Performance Rod)

    A011A3T

    1. Install the rear bumper reinforcement with the 6 bolts.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

  4. INSTALL REAR BUMPER SIDE RETAINER LH

    A011BWI

    1. Engage the 3 claws and install the rear bumper side retainer.

    2. Tighten the screw.

  5. INSTALL REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. INSTALL REAR BUMPER PAD


    1. Apply Primer G to the installation part of the rear bumper pads.

      Tech Tips

      If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.

    2. A0119JI

      Install the 2 new rear bumper pads onto the rear bumper cover, as shown in the illustration.

      Note


      • Allow the primer to dry for 3 minutes or more.

      • Throw away any leftover primer.

      • Do not apply too much primer.

  7. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    A011B08

    1. Install the reflex reflector with the nut.

      Torque:
      2.2 N*m  { 23 kgf*cm, 20 in.*lbf }

  8. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    A0117Z2

    1. Connect the connector.

    2. Engage the 2 claws and install the license plate light, as shown in the illustration.

  10. INSTALL REAR BUMPER GUARD SUB-ASSEMBLY (w/ Rear Under Spoiler)

    A0116X4

    1. Install the 6 grommets.

    2. A0117ZH

      Engage the guide and install the rear bumper guard.

    3. Install the 2 clips.

    4. Tighten the 6 screws.