REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER SIDE SEAL LH

    A0118WM

    1. Remove the 4 clips and the rear bumper side seal.

  2. REMOVE REAR BUMPER SIDE SEAL RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER COVER

    A0118C2E01

    1. Apply protective tape as shown in the illustration.

      Text in Illustration
      *1 Protective tape
    2. A01186S

      Using a "TORX" socket wrench T30, remove the 2 rear bumper cushions.

    3. A0117IJ

      Remove the 2 clips.

    4. A0119TKE01
      Text in Illustration
      *1 Protective tape
      *2 Front side

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw.

    5. A011B2U

      Disengage the 10 claws and remove the rear bumper cover.

    6. Disconnect the license plate light connector.