RELAY INSPECTION


  1. INSPECT HEADLIGHT RELAY

    A011BEG

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩor higher
        3 - 5 Apply the battery voltage between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the headlight relay.

  2. INSPECT HEADLIGHT DIMMER RELAY

    A0119F1

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩor higher
        3 - 5 Apply the battery voltage between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the headlight dimmer relay.

  3. INSPECT FOG LIGHT RELAY

    A0119F1

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩor higher
        3 - 5 Apply the battery voltage between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the fog light relay.