STOP LIGHT SWITCH INSTALLATION


  1. INSTALL STOP LIGHT SWITCH

    A011AKGE05

    1. Install the stop light switch into the adjuster until it slightly touches the brake pedal.

      Tech Tips

      Do not depress the brake pedal.


      1. A01175KE18

        Make a quarter turn clockwise to install the stop light switch.

        Tech Tips


        • Do not depress the brake pedal.

        • The turning torque for installing the stop light switch is as below.

        Torque:
        1.5 N*m  { 15 kgf*cm, 13 in.*lbf, or less }

    2. Check the stop light switch clearance.

      Stop light switch clearance
      0.5 to 2.6 mm (0.020 to 0.102 in.)
    3. A0119VN

      Connect the stop light switch connector to the stop light switch.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    A0118KA

    1. Engage the 3 claws and connect the hood lock control lever.

    2. A011AQB

      Connect the connector.

    3. Engage the 2 claws and connect the DLC3 connector.

    4. A011AI9

      Engage the 2 claws and 7 clips.

    5. Install the lower No. 1 instrument panel finish panel with the 2 <C> bolts.

  3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  4. INSTALL COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side Click here.

  5. INSTALL FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side Click here.