STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH


    1. Check the resistance.

      A0117QUE01
      Text in Illustration
      *1

      Component without harness connected

      (Stop Light Switch)

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Not pushed Below 1 Ω
        1 - 2 Pushed 10 kΩ or higher
        3 - 4 Not pushed 10 kΩ or higher
        3 - 4 Pushed Below 1 Ω

        If the result is not as specified, replace the stop light switch.