FRONT DOOR WINDOW FRAME MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE FRONT DOOR WINDOW FRAME REAR MOULDING


    1. Using an infrared light, heat the front door window frame rear moulding.

      CAUTION:

      Do not burn yourself with the heated front door panel or infrared light.

      Note

      Remove any tape remaining on the front door panel.

      Tech Tips

      Heat at 40 to 60°C (104 to 140°F) for 3 to 5 minutes.

    2. A011A4LE01
      Text in Illustration
      *1 Double-sided tape

      Pull out the front door window frame moulding with the door closed, and then remove the front door window frame moulding while peeling off the double-sided adhesive tape.

    3. A0117VF

      Using a clip remover, shift the clip sideways as shown in the illustration.

    4. Twist the clip remover and remove the 3 clips by disengaging them one side at a time.