ROOF DRIP SIDE FINISH MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING


    1. A011B0FE01
      Text in Illustration
      *1 Protective tape

      Apply protective tape as shown in the illustration.

    2. A0117BU

      Disengage the 2 clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clips.

      • Replace the clips with supply clips if damaged.