SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE OUTER MIRROR


    1. A0119V6E01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover

      Apply protective tape to the bottom of the visor of the door mirror.

    2. Push the upper part of the mirror surface and tilt it.

    3. Using a moulding remover, disengage the 2 claws and 2 guides and remove the outer mirror glass.

    4. Disconnect the connector.

  2. REMOVE OUTER MIRROR COVER


    1. A011B5S

      Disengage the 4 claws from the upper inside of the mirror body.

    2. A0118AO

      Push the upper part of the mirror cover forward to tilt it, and then disengage the 3 claws on the lower part to remove the outer mirror cover.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

    A011958

    1. Disconnect the connector.

    2. Remove the 3 screws and remove the side turn signal light.