LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Customize Setting.

    5. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting
      Light Auto OFF Delay OFF Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON OFF/30s/60s/90s
      Sensitivity NORMAL Function to adjust sensitivity of lighting illumination*1 Light2/Light1/Normal/Dark1/Dark2

      Tech Tips

      *1: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      *1
      Lighting brightness A01189U
      Setting Dark2 Dark1 Normal Light1 Light2