WIPER ECU REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE

    A011AJ3

    1. Disengage the 9 claws and remove the front door scuff plate.

  2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. Remove the front door opening trim weatherstrip to the extent that the lower No. 2 instrument panel finish panel can be removed.

  3. REMOVE COWL SIDE TRIM BOARD

    A0117YC

    1. Disengage the 2 claws and guide and remove the cowl side trim board.

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    A011ARPE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape, as shown in the illustration.

    2. A011BUZ

      Remove the <C> bolt.

    3. Disengage the 4 claws and 2 clips and remove the lower No. 2 instrument panel finish panel.

  5. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY


    1. A011A4V

      Disconnect the connector.

    2. Remove the bolt and windshield wiper relay.