WASHER NOZZLE ON-VEHICLE INSPECTION


  1. INSPECT FRONT WASHER NOZZLE


    1. With the engine running, check where the washer fluid hits the windshield.

      A011BGQE01
      Standard
      Area Measurement Area Measurement
      *1 259 mm (10.20 in.) *3 130 mm (5.12 in.)
      *2 613 mm (24.13 in.) *4 195 mm (7.68 in.)
      OK
      Washer fluid hits the windshield in the areas shown in the illustration.

      If the result is not as specified, replace the washer nozzle.

  2. INSPECT REAR WASHER NOZZLE


    1. With the engine running, check where the washer fluid hits the windshield.

      A011B6YE01
      Standard
      Area Measurement Area Measurement
      *1 27 mm (1.08 in.) *3 53 mm (2.10 in.)
      *2 47 mm (1.87 in.) - -
      OK
      Washer fluid hits the windshield in the area shown in the illustration.