REAR WIPER RUBBER REPLACEMENT


  1. REMOVE REAR WIPER BLADE


    1. A011BRL

      Raise the wiper blade to the position where the claw detaches with a ''click'' sound, as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. A0118UQ

      Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER RUBBER


    1. A011AG2E01

      Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber between the ends and middle will allow it to be removed more easily.

  3. INSTALL REAR WIPER RUBBER


    1. A0119IEE01

      Install the No. 1 and No. 2 backing plates as shown in the illustration.

      Note

      Install the backing plates facing the correct direction.

    2. A0119H9

      Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.

    3. After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

    4. A011BW5E02
      Text in Illustration
      *1 Front End Claw

      Slide the wiper rubber through the front end claw.

  4. INSTALL REAR WIPER BLADE


    1. A011B1Z

      Push the wiper blade straight toward the right side of the vehicle to install onto the wiper arm.

      Note

      Be careful not to damage the claw.