BACK DOOR SUPPORT INSTALLATION


  1. INSTALL BACK DOOR STAY BOLT


    1. A011A9O

      Clean the threaded portion on the vehicle body with a non-residue solvent.

    2. Apply adhesive to the threads of the 2 bolts.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    3. Install the back door stay bolt.

      Torque:
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }

  2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET


    1. Clean the threaded portion on the vehicle body with a non-residue solvent.

    2. Apply adhesive to the threads of the 2 bolts.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    3. A011790

      Install the back door damper stay upper bracket with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL BACK DOOR STAY ASSEMBLY

    Note


    • Avoid touching the stroke portions of the rod as much as possible to prevent foreign matter from attaching to the stroke portions. Be sure to hold the cylinders while servicing.

    • Do not wear cotton gloves or other similar materials when handling the rod. Fibers may attach to the rod and result in gas leaks.

    • Do not apply any load to the cylinders in the horizontal direction, in order to prevent the rod from being deformed.


    1. A0117C5

      Install the back door stay on the 2 ball joints.

      Note

      Install the back door stay while supporting the back door by hand.

    2. Engage the 2 stop rings.