BACK DOOR GLASS REMOVAL


  1. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A011A6Y

      Open the rear wiper arm head cap.

    2. A011AG3

      Remove the nut and remove the rear wiper arm and blade.

  2. REMOVE BACK DOOR TRIM BOARD


    1. A011735

      Disengage the 9 clips and remove the back door trim board.

  3. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY

    A011982

    1. Disconnect the connector.

    2. Remove the 2 clips and the high mounted stop light.

  4. REMOVE BACK DOOR GLASS

    A0117IIE01
    Text in Illustration
    *1 Protective Tape
    *2 Wooden Block
    *3 Spacer
    *4 Piano Wire

    1. Disconnect the 2 back door defogger connectors.

    2. Apply protective tape to the outer edge of the back door glass, as shown in the illustration.

    3. From the interior, insert piano wires between the vehicle body and back door glass, as shown in the illustration.

    4. Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.

      Note

      When separating the back door glass from the vehicle, do not damage the vehicle's paint or exterior/interior ornaments.

    5. Cut through the adhesive by pulling the piano wire around the back door glass.

    6. A011BHIE01
      Text in Illustration
      *1 Mark
      *2 Suction Cup

      Place matchmarks on the back door glass and vehicle body on the locations indicated in the illustration.

      Tech Tips

      Matchmarks do not need to be placed if the back door glass is not going to be reused.

    7. Disengage the 2 clips.

    8. Using suction cups, remove the back door glass.

      Note

      Leave as much adhesive on the vehicle body as possible when removing the back door glass.

  5. REMOVE BACK WINDOW GLASS CLIP LH


    1. Using a scraper, remove the back window glass clip.

      Note


      • Be careful not to damage the back window glass.

      • Be sure to replace the back window glass clip with new one.

  6. REMOVE BACK WINDOW GLASS CLIP RH


    1. Using a scraper, remove the back window glass clip.

      Note


      • Be careful not to damage the back window glass.

      • Be sure to replace the back window glass clip with new one.