QUARTER WINDOW GLASS REMOVAL

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  3. REMOVE QUARTER WINDOW GLASS

    A011911E01
    Text in Illustration
    *1 Protective Tape
    *2 Piano Wire
    *3 Wooden Block

    1. Apply protective tape to the outer circumference of the quarter window, as shown in the illustration.

    2. From the interior, insert piano wires between the vehicle body and quarter window, as shown in the illustration.

    3. Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.

      Note

      When separating the quarter window from the vehicle, do not damage the vehicle's paintwork or exterior/interior ornaments.

    4. Cut through the adhesive by pulling the piano wire around the quarter window.

  4. REMOVE NO. 2 SIDE WINDOW CLIP


    1. Using a scraper, remove the side window clip.

      CAUTION:


      • Be careful not to damage the side window.

      • Be sure to replace the side window clip with new one.

  5. REMOVE NO. 4 SIDE WINDOW CLIP

    Tech Tips

    Use the same procedure as for the No. 2 side window clip.