AMBIENT TEMPERATURE SENSOR INSTALLATION


  1. INSTALL AMBIENT TEMPERATURE SENSOR (THERMISTOR ASSEMBLY)

    A0118NI

    1. Engage the clamp and install the ambient temperature sensor.

    2. Connect the connector.

  2. INSTALL FRONT BUMPER COVER

    A0117J9

    1. Engage the 6 claws and install the front bumper cover.

    2. A011AST

      Tighten the 4 screws.

    3. A0119NZ

      Install the 5 clips.

    4. A01180SE01

      Install the pin hold clip.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertically.

      Tech Tips

      Use the same procedure for the RH and LH sides.

  3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    A011BPD

    1. Install the front wheel opening extension pad with the 2 screws.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure as for the LH side.