REAR SPOILER (for Sedan) INSTALLATION

Tech Tips


  • A bolt without a torque specification is shown in the standard bolt chart Click here.

  • When installing the rear spoiler, heat the vehicle body and rear spoiler using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)
    Vehicle Body 40 to 60°C (104 to 140°F)

    Note

    Do not heat the rear spoiler and vehicle body excessively.


  1. INSTALL REAR SPOILER


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new rear spoiler.


      1. Using a heat light, heat the vehicle body and a new rear spoiler.

      2. Remove the peeling paper from the face of the rear spoiler.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 5 clips and double-sided tape to install the rear spoiler.

        Tech Tips

        Press the rear spoiler firmly to install it.

        A003AH3E01
        Text in Illustration
        *1 Double-sided Tape
      4. A003CT7

        Install the 2 nuts.

  2. INSTALL BACK DOOR TRIM COVER


    1. A00OVHE

      Attach the 10 clips to install the cover.

  3. INSTALL DOOR ASSIST GRIP


    1. A00OV2O

      Attach the 2 claws to install the door assist grip.

  4. INSTALL BACK DOOR ASSIST GRIP


    1. A00OTW5

      Install the assist grip with the 2 screws.

    2. A00OVQA

      Attach the 3 claws to install the cover.