STOP LIGHT CONTROL RELAY (for LHD) ON-VEHICLE INSPECTION


  1. INSPECT STOP LIGHT CONTROL RELAY ASSEMBLY


    1. A003CNCE01
      Text in Illustration
      *1

      Component with harness connected

      (Stop Light Control Relay Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      A12-6 (+B) - A12-8 (GND) Always 11 to 14 V
      A12-5 (STP) - A12-8 (GND) Brake pedal released Below 1 V
      Brake pedal depressed 11 to 14 V
      A12-1 (OUT) - Body ground Brake pedal released Below 1 V
      Brake pedal depressed 11 to 14 V

      If the result is not as specified, replace the stop light control relay.