BACK-UP LIGHT ASSEMBLY (for Wagon) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR LIGHT SOCKET AND WIRE LH


    1. Connect the connector.

    2. Attach the 3 claws to install the rear light socket and wire LH.

  2. INSTALL NO. 1 REAR FOG LIGHT BULB (for LH Side)


    1. A00ON5N

      Install the No. 1 rear fog light bulb to the rear light socket and wire LH.

    2. Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration to install the socket.

  3. INSTALL BACK UP LIGHT BULB (for RH Side)


    1. A00OLSE

      Install the back up light bulb to the rear light socket and wire RH.

    2. Turn the rear light socket and wire RH in the direction indicated by the arrow in the illustration to install the socket.

  4. INSTALL REAR LIGHT PACKING LH


    1. Install a new rear light packing LH.

  5. INSTALL REAR LIGHT LENS AND BODY LH


    1. Install the rear light lens and body LH with the 4 nuts.

    2. Connect the connector.

  6. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A00ONB5

      Attach the 14 clips to install the back door trim board.

  7. INSTALL BACK DOOR SIDE GARNISH LH


    1. A00OHU3

      Attach the 2 clips and claw to install the back door side garnish.

  8. INSTALL BACK DOOR SIDE GARNISH RH


    1. A00OKRN

      Attach the 2 clips and claw to install the back door side garnish.

  9. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A00ONFV

      Attach the 4 clips to install the upper back door trim panel