BACK-UP LIGHT ASSEMBLY (for Sedan) INSPECTION


  1. INSPECT REAR LIGHT LENS AND BODY LH


    1. A00OKQ0E05
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Lens and Body LH)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 1 (E)

      		 LED illuminates

      If the result is not as specified, replace the rear light lens and body LH.

  2. INSPECT REAR LIGHT LENS AND BODY RH


    1. A00OKQ0E05
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Lens and Body RH)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 1 (E)

      		 LED illuminates

      If the result is not as specified, replace the rear light lens and body RH.