REAR COMBINATION LIGHT ASSEMBLY (for Wagon) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003ATB

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    A003CVN

    1. Remove the bolt and disconnect the rear seat 3 point type belt anchor.

    2. A003AHX

      Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.

    3. Remove the seat belt from the belt guide.

    4. A003CZ2E01

      Remove the bolt, and then remove the side seatback LH as shown in the illustration.

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A00OSNY

    1. Pull the lever and remove the tonneau cover.

  5. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    A00OR3J

    1. Push the 2 buttons and remove the room partition net.

  6. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)


    1. Remove the lower deck trim side board.

  7. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)


    1. Remove the lower deck trim side board.

  8. REMOVE DECK BOARD ASSEMBLY

    A00OQO7

    1. Detach the clip and 2 guides, and remove the deck board.

  9. REMOVE DECK BOARD SUB-ASSEMBLY

    A00OS46

    1. Pull the lever and remove the deck board.

  10. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    1. Detach the clip and remove the No. 3 deck board.

      A00OR6BE01
  11. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 deck board.

  12. REMOVE REAR DECK FLOOR BOX


    1. Detach the 7 guides and remove the rear deck floor box.

      A00OUVIE01
  13. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    A00OUPD

    1. Remove the 3 bolts and floor side rail.

  14. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00OVHP

    1. Detach the 2 clips and 3 guides, and remove the deck side trim cover.

  16. REMOVE NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 2 deck side trim cover.

  17. REMOVE NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00OQJ8

    1. Detach the 3 claws and remove the No. 6 deck side trim cover.

  18. REMOVE NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 6 deck side trim cover.

  19. REMOVE ROPE HOOK ASSEMBLY (w/o Deck Rail)

    A00OQZV

    Tech Tips

    Use the same procedure for all the rope hooks.


    1. Remove the bolt and rope hook.

  20. REMOVE DECK FLOOR BOX LH

    A00OT7E

    1. Remove the bolt.

    2. Detach the 5 guides and remove the deck floor box.

  21. REMOVE DECK FLOOR BOX RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE REAR FLOOR FINISH PLATE

    A00OU9R

    1. Detach the 4 clips and remove the rear floor finish plate.

  23. REMOVE FRONT DECK FLOOR BOX

    A00OU2I

    1. Remove the 2 clips.

    2. Detach the 4 guides and remove the front deck floor box.

  24. REMOVE REAR DOOR SCUFF PLATE LH

    A010S97

    1. Detach the 6 claws and clip, and remove the rear door scuff plate.

  25. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A00OUEF

    1. Remove the rear door opening trim weatherstrip.

  26. REMOVE BACK DOOR WEATHERSTRIP

    A00OV4V

    1. Remove the back door weatherstrip.

  27. REMOVE INNER ROOF SIDE GARNISH CAP LH

    A00OVZLE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the inner roof side garnish cap.

    2. Using a screwdriver, detach the 2 claws and remove the inner roof side garnish cap.

      Tech Tips

      Tape the screwdriver tip before use.

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the bolt and clip.

    2. Detach the 7 clips and 3 claws.

    3. Pass the fuel lid opener cable through the panel, disconnect the connector, and then remove the deck trim side panel.

      A00OUSXE01
      Text in Illustration
      *1 Fuel Lid Opener Cable - -
  29. REMOVE REAR COMBINATION LIGHT LENS AND BODY LH


    1. A00OW38E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear combination light lens and body LH.

    2. Disconnect the connector.

    3. Remove the 3 nuts.

    4. Detach the clip and remove the rear combination light lens and body LH.

  30. REMOVE REAR COMBINATION LIGHT BODY GASKET LH


    1. Remove the rear combination light body gasket LH.

      Note

      Be sure to remove the gasket completely from the body.

  31. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A00OUYE

      Turn the rear combination light bulb holder LH in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the rear turn signal light bulb from the rear combination light bulb holder LH.

  32. REMOVE REAR COMBINATION LIGHT BULB HOLDER LH


    1. A00OVAI

      Detach the clamp and 2 claws.

    2. Detach the guide and remove the rear combination light bulb holder LH.

    3. Disconnect the connector.