RAIN SENSOR INSTALLATION


  1. INSTALL RAIN SENSOR


    1. Clean the surface of the windshield glass that contacts the rain sensor.

    2. When replacing the rain sensor with a new one:

      Remove the protective cover on the rain sensor.

      Note

      Do not touch the silicon mixture directly with a finger.

    3. A006T6J

      Connect the connector.

      Note

      Do not touch the silicon mixture directly with a finger.

    4. A006W64

      Attach the 2 claws to install the rain sensor.

      Note

      Make sure that there are no air bubbles between the silicon mixture and windshield glass.

  2. INSTALL NO. 2 RAIN SENSOR COVER


    1. A006WN1

      Using a screwdriver, attach the 2 claws to install the No. 2 rain sensor cover.

  3. INSTALL NO. 1 RAIN SENSOR COVER


    1. A006V8F

      Attach the 3 claws to install the No. 1 rain sensor cover.

  4. INSTALL FRONT ROOF TOP GARNISH


    1. Attach the 2 claws and clip to install the front roof top garnish.

      A00EAPCE01

      Note

      When removing the rain sensor cover, do not apply force to the lane recognition camera sensor assembly areas labeled "X".