WASHER NOZZLE (for Rear) ON-VEHICLE INSPECTION


  1. INSPECT REAR WASHER NOZZLE


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A003EMKE01
      Text in Illustration
      *1 Ceramic Line *2 Wiper Pattern
      Standard
      Area Specified Condition
      A 97.5 mm (3.84 in.)
      B 36.7 mm (1.44 in.)

      If the result is not as specified, replace the rear washer nozzle.