WASHER NOZZLE (for Front) ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      OK
      Washer fluid hits the windshield in the area shown in the illustration.

      If the result is not as specified, replace the washer nozzle.

      A003EL6E01
      Text in Illustration
      *1 Ceramic Edge *3 Lower Limit
      *2 Washer Fluid Spray Area *4 Upper Limit
      Standard
      Area Specified Condition Area Specified Condition
      A 131 mm (5.16 in.) D 564 mm (22.2 in.)
      B 131 mm (5.16 in.) E 361 mm (14.2 in.)
      C 53 mm (2.09 in.) F 361 mm (14.2 in.)