WASHER MOTOR (for Rear Side) INSPECTION


  1. INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the rear washer motor and pump connector.

      Tech Tips

      Make sure that the rear washer motor and pump is installed to the washer jar.

    3. Fill the washer jar with washer fluid.

    4. A00OM4F

      Connect the battery's positive (+) lead to terminal 1 of the rear washer motor and pump, and the negative (-) lead to terminal 2.

    5. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the rear washer motor and pump assembly.