REAR WIPER MOTOR (for Wagon) INSTALLATION

INSTALL REAR WIPER MOTOR GROMMET

1. 

   Text in Illustration

   *1

   MP grease

   Apply MP grease to the entire surface of the wiper motor grommet lip.

   Tech Tips

   Make sure that the hole does not get clogged with grease and the grooves on the lip are filled with grease.

2. 

   Text in Illustration

   *1	Position Mark

   Install the rear wiper motor grommet with the position mark facing upward as shown in the illustration.

INSTALL REAR WIPER MOTOR ASSEMBLY

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

INSTALL REAR WIPER ARM

1. Operate the rear wiper, and stop the rear wiper motor at the automatic stop position.

2. 

   Text in Illustration

   *1	Wiper Arm Pivot Serrations
   *2	Wire Brush
   *3	Wiper Pivot Serrations

   Clean the serrations with a wire brush.

3. 

   Text in Illustration

   *1	Defogger Line

   Set the head of the blade on the defogger line.

4. Install the rear wiper arm with the nut.

   Torque:

   5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

5. Close the wiper arm head cap.