FUEL LID OPENER MOTOR ASSEMBLY (for Wagon) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. A00OLJW

      Attach the 2 claws to install the fuel filler opening lid lock retainer.

  2. INSTALL FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A00OHXX

      Install the fuel lid with motor lock assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the connector.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Pass the fuel lid opener cable through the deck trim side panel.

    2. Connect the connector.

    3. Attach the 7 clips and 3 claws to install the deck trim side panel.

    4. Install the bolt and clip.

      A00OUSXE01
      Text in Illustration
      *1 Fuel Lid Opener Cable - -

  4. INSTALL INNER ROOF SIDE GARNISH CAP LH

    A00OTFR

    1. Attach the 2 claws to install the inner roof side garnish cap.

  5. INSTALL BACK DOOR WEATHERSTRIP

    A00OV2L

    1. Align the center mark of the back door weatherstrip with the position indicated by the arrow in the illustration and install the back door weatherstrip.

  6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A00OUI6E01
    Text in Illustration
    *1 Paint Mark
    *2 Mark Position

    1. Install the rear door opening trim weatherstrip as shown in the illustration.

  7. INSTALL REAR DOOR SCUFF PLATE LH

    A00OUXN

    1. Attach the clip and 6 claws to install the front door scuff plate.

  8. INSTALL FRONT DECK FLOOR BOX

    A00OU2I

    1. Attach the 4 guides to install the front deck floor box.

    2. Install the 2 clips.

  9. INSTALL REAR FLOOR FINISH PLATE

    A00OU9R

    1. Attach the 4 clips to install the rear floor finish plate.

  10. INSTALL DECK FLOOR BOX LH

    A00OTDZ

    1. Attach the 5 guides to install the deck floor box.

  11. INSTALL DECK FLOOR BOX RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL ROPE HOOK ASSEMBLY (w/o Deck Rail)

    A00OQZV

    Tech Tips

    Use the same procedure for all the rope hooks.


    1. Install the rope hook with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  13. INSTALL NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00OQJ8

    1. Attach the 3 claws to install the No. 6 deck side trim cover.

  14. INSTALL NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 6 deck side trim cover.

  15. INSTALL NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    A00OVHP

    1. Attach the 2 clips and 3 guides to install the No. 2 deck side trim cover.

  16. INSTALL NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Tech Tips

    Use the same procedure described for the No. 2 deck side trim cover.

  17. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    A00OUPD

    1. Install the floor side rail with the 3 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  18. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  19. INSTALL REAR DECK FLOOR BOX


    1. Attach the 7 guides to install the rear deck floor box.

      A00OUVIE01
    2. A00OT15

      Install the bolt.

    3. A00OUVL

      Install the bolt.

  20. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    1. Attach the clip to install the No. 3 deck board.

      A00OR6BE01

  21. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 deck board.

  22. INSTALL DECK BOARD SUB-ASSEMBLY

    A00OS46

    1. Pull the lever to install the deck board.

  23. INSTALL DECK BOARD ASSEMBLY

    A00OQO7

    1. Attach the clip and 2 guides to install the deck board.

  24. INSTALL LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)


    1. Install the lower deck trim side board.

  25. INSTALL LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)


    1. Install the lower deck trim side board.

  26. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    A00OQII

    1. Install the room partition net.

  27. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    A00OSNY

    1. Pull the lever to install the tonneau cover.

  28. INSTALL REAR SIDE SEATBACK ASSEMBLY LH


    1. A003C8D

      Install the claw as shown in the illustration.

    2. Install the side seatback with the bolt.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
    3. A003CVNE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat 3 point type belt anchor with the bolt.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat 3 point type belt to overlap the protruding parts of the floor panel.

    4. Install the seat belt to the belt guide.

    5. Attach the claw to close the cap of the rear seat shoulder belt guide.

    6. Check if the ELR locks.

      Note

      The check should be performed with the outer belt assembly installed.


      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

  29. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003CGQ

    1. Attach the 2 rear hooks of the seat cushion to the seatback.

    2. Attach the 2 front hooks to install the seat cushion.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.