OUTER REAR VIEW MIRROR REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A003CZK

      Connect the connector.

    2. Attach the 2 claws to install the side turn signal light.

    3. A003DSA

      Using a T10 "TORX" socket wrench, install the 2 screws.

  2. INSTALL OUTER MIRROR COVER LH


    1. A003E66

      Position the bottom of the cover in place.

    2. Rotate the cover toward the mirror body to attach the 4 claws.

    3. Push the top edge of the cover to install the cover to the mirror body.

    4. Check that there is no gap between the cover and mirror body.

      Tech Tips

      If there is a gap between the cover and body, noise will occur while driving.

  3. INSTALL OUTER MIRROR LH

    A003B9B

    1. Connect the 4 connectors.

    2. Insert the blade dampers into the slots in the mirror body and push in the mirror to install it.

      Note

      When installing the mirror, make sure that the wire harness does not get pinched.

    3. A003C1Z

      Attach the 3 claws to install the outer mirror.