LUGGAGE COMPARTMENT DOOR INSTALLATION


  1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY


    1. A003DKT

      Connect the connector and install the back door opener switch.

  2. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. A003AJI

      Attach the 4 claws to install the 2 lights.

    2. Connect the 2 connectors.

  3. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE

    A003ANE

    1. Attach the clip to install the luggage compartment door garnish outside.

    2. A003CYE

      Install the 6 nuts.

  4. INSTALL REAR LIGHT LENS AND BODY LH


    1. A003EEF

      Install the rear light lens and body with the 4 nuts.

    2. Connect the connector.

  5. INSTALL REAR LIGHT LENS AND BODY RH


    1. A003BRR

      Install the rear light lens and body with the 4 nuts.

    2. Connect the connector.

  6. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. A003DPI

      Connect the connector.

    2. A003CE5

      Install the camera with the 2 nuts.

  7. INSTALL LUGGAGE DOOR OPENER CABLE PROTECTOR RH (w/ Double Locking System)


    1. A003CZM

      Attach the 2 claws to install the luggage door opener cable protector.

  8. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A003AQ2

      w/ Double Locking System:

      Attach the 6 clamps to install the cable sub-assembly.

    2. A003AYK

      w/o Double Locking System:

      Attach the 6 clamps to install the cable sub-assembly.

  9. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    Note


    • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

    • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.


    1. A00OJC3

      Connect the connector.

    2. Install the back door lock assembly with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  10. INSTALL NO. 2 WIRING HARNESS PROTECTOR


    1. A003DE6

      Attach the 8 claws to install the No. 12 wiring harness protector and No. 2 wiring harness protector.

    2. A003AVK

      Install the protector with the clip.

    3. A003CSU

      Attach the claw to install the cable lever.

  11. INSTALL NO. 3 WIRING HARNESS PROTECTOR


    1. A003B3E

      Attach the 8 claws to install the No. 13 wiring harness protector and No. 3 wiring harness protector.

    2. A003AIA

      Install the protector with the clip.

  12. INSTALL REAR SPOILER (w/ Rear Spoiler)


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new rear spoiler.


      1. Using a heat light, heat the vehicle body and a new rear spoiler.

      2. Remove the peeling paper from the face of the rear spoiler.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 5 clips and double-sided tape to install the rear spoiler.

        Tech Tips

        Press the rear spoiler firmly to install it.

        A003AH3E01
        Text in Illustration
        *1 Double-sided Tape
      4. A003CT7

        Install the 2 nuts.

  13. INSTALL BACK DOOR TRIM COVER


    1. A003DPH

      Attach the 10 clips to install the cover.

  14. INSTALL DOOR ASSIST GRIP


    1. A003BP6

      Attach the 2 claws to install the door assist grip.

  15. INSTALL BACK DOOR ASSIST GRIP


    1. A003EBM

      Install the assist grip with the 2 screws.

    2. A003D82

      Attach the 3 claws to install the cover.