LUGGAGE COMPARTMENT DOOR REMOVAL


  1. REMOVE BACK DOOR ASSIST GRIP


    1. A003E1D

      Using a screwdriver, detach the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A003EBM

      Remove the 2 screws and assist grip.

  2. REMOVE DOOR ASSIST GRIP


    1. A003BP6E01

      Pull the assist grip in the direction shown by the arrow labeled (1) to disconnect the grip.

    2. Pull out the assist grip to remove it.

  3. REMOVE BACK DOOR TRIM COVER


    1. A003DPH

      Using a clip remover, remove the 10 clips and cover.

  4. REMOVE REAR SPOILER (w/ Rear Spoiler)

    A003CT7

    1. Remove the 2 nuts.

    2. Put protective tape around the rear spoiler.

    3. Insert a piano wire between the vehicle body and rear spoiler.

    4. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    5. Pull the piano wire and scrape off the double-sided tape that holds the rear spoiler to the vehicle body.

    6. Detach the 5 clips and remove the rear spoiler.

      Note

      Be careful not to damage the vehicle body.

      A003DILE01
      Text in Illustration
      *1 Protective Tape *3 Double-sided Tape
      *2 Wooden Block - -

  5. REMOVE NO. 3 WIRING HARNESS PROTECTOR


    1. A003AIA

      Using a clip remover, remove the clip.

    2. A003CQM

      Using a screwdriver, detach the 8 claws and remove the No. 13 wiring harness protector and No. 3 wiring harness protector.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE NO. 2 WIRING HARNESS PROTECTOR


    1. A003CSU

      Detach the claw and remove the cable lever.

    2. A003AVK

      Using a clip remover, remove the clip and protector.

    3. A003E02

      Using a screwdriver, detach the 8 claws and remove the No. 12 wiring harness protector and No. 2 wiring harness protector.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. A003AR3

      Remove the 3 bolts and back door lock assembly.

    2. Disconnect the connector.

  8. REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A003AQ2

      w/ Double Locking System:

      Using a clip remover, remove the 5 clamps and cable sub-assembly.

    2. A003AYK

      w/o Double Locking System:

      Using a clip remover, remove the 6 clamps and cable sub-assembly.

  9. REMOVE LUGGAGE DOOR OPENER CABLE PROTECTOR RH (w/ Double Locking System)


    1. A003CZM

      Detach the 2 claws and remove the luggage door opener cable protector.

  10. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. A003CE5

      Remove the 2 nuts and camera.

    2. A003DPI

      Disconnect the connector.

  11. REMOVE REAR LIGHT LENS AND BODY LH


    1. A003EEF

      Disconnect the connector.

    2. Remove the 4 nuts and rear light lens and body.

  12. REMOVE REAR LIGHT LENS AND BODY RH


    1. A003BRR

      Disconnect the connector.

    2. Remove the 4 nuts and rear light lens and body.

  13. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE

    A003CYEE01

    1. Put protective tape around the luggage compartment door garnish outside.

      Text in Illustration
      *1 Protective Tape

    2. Remove the 6 nuts.

    3. A003ANE

      Detach the clip and remove the luggage compartment door garnish outside.

      Tech Tips

      Detach the clip from the backside of the luggage compartment door garnish outside.

  14. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A003AJI

      Disconnect the 2 connectors.

    2. Detach the 4 claws and remove the 2 lights.

  15. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    1. A003DKT

      Disconnect the connector and remove the back door opener switch.