LUGGAGE DOOR HINGE TORSION BAR REMOVAL


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003ATB

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    A003CVN

    1. Remove the bolt and disconnect the rear seat 3 point type belt anchor.

    2. A003AHX

      Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.

    3. Remove the seat belt from the belt guide.

    4. A003CZ2E01

      Remove the bolt, and then remove the side seatback LH as shown in the illustration.

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  4. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    A00DV1K

  5. REMOVE REAR FLOOR BOARD SPACER

    A00DS4UE01

  6. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    A00DSNXE01

  7. REMOVE ROPE HOOK ASSEMBLY


    1. A00DQ4Z

      Remove the 4 bolts and 4 rope hooks.

  8. REMOVE REAR FLOOR FINISH PLATE


    1. A00DPVX

      Remove the 2 clips.

    2. A00DQPN

      Detach the 4 clips and remove the finish plate.

  9. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A00DPQ4

      Using a clip remover, remove the 4 clips.

    2. A00DUUV

      Pass the fuel lid opener cable through the trim cover.

    3. Remove the trim cover.

  10. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A00DRBK

      Using a clip remover, remove the 4 clips and luggage compartment trim cover.

  11. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A00DR0C

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A00DUSN

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    3. A00DSSYE01

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and body LH side as shown in the illustration.

      SST
      09804-24010
    4. A00DSSI

      Remove the luggage door hinge torsion bar LH from the body RH side as shown in the illustration.

  12. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A00DPKH

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    2. A00DTUBE01

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and body RH side as shown in the illustration.

      SST
      09804-24010
    3. A00DSFK

      Remove the luggage door hinge torsion bar RH from the body LH side as shown in the illustration.

  13. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A00DV07

      Remove the luggage compartment door torsion bar support as shown in the illustration.