LUMBAR SWITCH (for Manual Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUMBAR FRONT POWER SEAT SWITCH


    1. A00OL4J

      Install the lumbar front power seat switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. A00OV7P

      w/ Lumbar Support:

      Connect the connector.

    2. A00OU31

      Attach the claw and hook to install the front seat cushion shield LH.

    3. Install the 2 screws.

    4. A00OUW4

      Attach the 2 rubber bands.

  3. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. A00OTKH

      Attach the claw to install the reclining adjuster release handle LH.

  4. INSTALL VERTICAL ADJUSTING HANDLE LH


    1. A00OT5S

      Install the vertical adjusting handle LH with the 2 screws.

  5. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP


    1. A00OV1V

      Attach the 3 claws to install the vertical seat adjuster knob cap.

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here

  7. CHECK SRS WARNING LIGHT

    Click here

  8. INSPECT FRONT SEAT ASSEMBLY


    1. Check the lumbar support operation.


      1. Operate the lumbar front power seat switch and check that the lumbar support moves in both directions.

    2. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Operate the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.