SEAT MEMORY SWITCH INSPECTION


  1. INSPECT SEAT MEMORY SWITCH (for LHD)


    1. A003B0TE01
      Text in Illustration
      *1

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (M1) - 4 (E) M1 switch pressed Below 1 Ω
      3 (M2) - 4 (E) M2 switch pressed
      1 (MRY) - 4 (E) SET switch pressed

      If the result is not as specified, replace the seat memory switch.

  2. INSPECT SEAT MEMORY SWITCH (for RHD)


    1. A003CIHE01
      Text in Illustration
      *1

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (M1) - 4 (E) M1 switch pressed Below 1 Ω
      3 (M2) - 4 (E) M2 switch pressed
      1 (MRY) - 4 (E) SET switch pressed

      If the result is not as specified, replace the seat memory switch.