LUMBAR SWITCH (for Manual Seat) REMOVAL

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP


    1. A010IM5

      Using a screwdriver, detach the 2 claws and remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE VERTICAL ADJUSTING HANDLE LH


    1. A010LKH

      Remove the 2 screws and handle.

  4. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A010LM3

      Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the release handle.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A010KEO

      Remove the 2 screws.

    2. Pull the shield to detach the hook and claw.

    3. Remove the cushion shield.

    4. A010I8D

      w/ Lumbar Support:

      Disconnect the connector.

  6. REMOVE LUMBAR FRONT POWER SEAT SWITCH


    1. A003D12

      Remove the 2 screws and switch.