SEAT BELT CONTROL ECU (for RHD) REMOVAL


  1. REMOVE COIN BOX ASSEMBLY


    1. A00OVGF

      Slightly bend the upper part of the coin box to release the 2 stoppers and open the coin box until it is horizontal.

    2. A00OTI6

      Pull the coin box toward the rear of the vehicle to detach the 2 hinges and remove the coin box.

  2. REMOVE INSTRUMENT SIDE PANEL RH


    1. A00ORVPE01
      Text in Illustration
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 3 clips and 4 claws.

    3. A00OTT8E01
      Text in Illustration
      *1 w/ Airbag Cut Off Switch Cylinder

      w/ Airbag Cut Off Switch Cylinder:


      1. Disconnect the connector.

    4. Detach the 2 hooks and remove the side panel.

  3. REMOVE SEAT BELT CONTROL ECU


    1. A006T46

      Disconnect the 2 connectors and detach the clamp.

    2. A006WGW

      Remove the bolt and seat belt control ECU.