AIRBAG CUT-OFF SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A00OU6B

      Attach the 2 claws to install the cutoff switch cylinder.

  2. INSTALL INSTRUMENT SIDE PANEL RH


    1. A00OTT8E01
      Text in Illustration
      *1 w/ Airbag Cut Off Switch Cylinder

      Attach the 2 hooks.

    2. w/ Airbag Cut Off Switch Cylinder:


      1. Connect the connector.

    3. A00OUWP

      Attach the 3 clips and 4 claws to install the side panel.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.