FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH


    1. Install front seat airbag assembly LH with 2 new nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Attach the 4 harness clamps and connect the connector clamp.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK PAD

    A010SC1

    1. Install the separate type front seatback pad.

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)


    1. A010HN1

      Attach the 2 hooks.

    2. A010GC3

      Attach the 2 claws to install the 2 headrest supports.

    3. w/o Active Headrest:

      Install the front seat headrest.

    4. w/ Active Headrest:


      1. A010GCD

        Install the front seat headrest.

      2. A010GJFE01

        Install the wire in the order shown in the illustration.

      3. A010HE4

        Attach the 2 claws to attach the wire.

      4. A010G4P

        Attach the 2 claws to install the active headrest lower unit.

      5. A010IKT

        Pull the wire and connect the end of the wire to the active headrest lower unit.

      6. A010HQA

        Install a new cable tie.

      7. A010L81

        Attach the 2 hooks to close the seatback mat.

    5. A010JS3E02
      Text in Illustration
      *1 Hook
      *2 Hog Ring
      *3 Hog Ring Pliers

      Attach the 3 hooks.

    6. Using hog ring pliers, install the upper part of the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    7. A010IWX

      Attach the front seatback cover bracket with the screw.

    8. A010L5V

      Pass the 2 straps through the separate type front seatback pad holes to the backside.

    9. A010KD8

      Attach the 2 hooks to install the 2 straps.

    10. A010JHK

      Attach the 2 hooks at the bottom of the seatback cover

    11. Attach the 4 hooks to install the cover.

      A010M5P

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)


    1. A010HN1

      Attach the 2 hooks.

    2. A010GC3

      Attach the 2 claws to install the 2 headrest supports.

    3. A010GCD

      Install the front seat headrest.

    4. A010GJFE01

      Install the wire in the order shown in the illustration.

    5. A010HE4

      Attach the 2 claws to attach the wire.

    6. A010G4P

      Attach the 2 claws to install the active headrest lower unit.

    7. A010IKT

      Pull the wire and connect the end of the wire to the active headrest lower unit.

    8. A010HQA

      Install a new cable tie.

    9. A010L81

      Attach the 2 hooks and close the seatback mat.

    10. A010JS3E02
      Text in Illustration
      *1 Hook
      *2 Hog Ring
      *3 Hog Ring Pliers

      Attach the 3 hooks.

    11. Using hog ring pliers, install the upper part of the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    12. A010IWX

      Attach the seatback cover bracket with the screw.

    13. A010L5V

      Pass the 2 straps through the separate type front seatback pad holes to the backside.

    14. A010KD8

      Attach the 2 hooks to install the 2 straps.

    15. A010JHK

      Attach the 2 hooks at the bottom of the seatback cover

    16. Attach the 4 hooks to install the cover.

      A010LK7

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH


    1. A010FYQE01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Attach the wire harness clamp and hook to install the shield.

    2. Install the 2 screws.

  6. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat)


    1. A010FYQE01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Attach the wire harness clamp and hook to install the shield.

    2. Install the 2 screws.

  7. INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH (for Power Seat)


    1. A010H4B

      for Driver Side:

      Connect the connector.

    2. A010L01

      Attach the hook to install the front seat cushion shield LH with front seat inner No. 1 cushion shield.

    3. Install the 2 screws.

    4. A010KW3

      Attach the 2 claws and install the 2 screws.

  8. INSTALL SLIDE & VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)


    1. A010LMY

      Attach the 4 claws to install the knob.

  9. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)


    1. A010M69

      Attach the 2 claws to install the knob.

  10. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)


    1. A010KI5

      Attach the claw to install the release handle.

  11. INSTALL VERTICAL ADJUSTING HANDLE LH (for Manual Seat Driver Side)


    1. A010LKH

      Install the handle with the 2 screws.

  12. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat Driver Side)


    1. A010IM5

      Attach the 2 claws to install the cap.

  13. INSTALL FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here