LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Key Unlock Warning SW Unlock warning switch signal / ON or OFF

      ON: Key in ignition key cylinder

      OFF: No key in ignition key cylinder

      		 -
      ACC SW Ignition switch signal / ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch signal / ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch ACC or off

      		 -
      D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF

      ON: Driver side door courtesy light switch on

      OFF: Driver side door courtesy light switch off

      		 -
      P Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF

      ON: Front passenger side door courtesy light switch on

      OFF: Front passenger side door courtesy light switch off

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door courtesy light switch LH on

      OFF: Rear door courtesy light switch LH off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door courtesy light switch RH on

      OFF: Rear door courtesy light switch RH off

      		 -
      Door Key SW-Lock Door key switch lock signal / ON or OFF

      ON: Door key switch turned to LOCK

      OFF: Door key switch not turned to LOCK

      		 -
      Door Key SW-Unlock Door key switch unlock signal / ON or OFF

      ON: Door key switch turned to UNLOCK

      OFF: Door key switch not turned to UNLOCK

      		 -
      D-Door Lock Pos SW Driver side door unlock detection switch signal / ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      P-Door Lock Pos SW Front passenger side door unlock detection switch signal / ON or OFF

      ON: Front passenger side door unlocked

      OFF: Front passenger side door locked

      		 -
      I/L ON W/Door Key Unlock Illumination function when door unlocked with door key cylinder / ON or OFF Customize setting displayed -
      Lighting Time Time before lights turn off after doors closed / 7.5s or 15s or 30s Customize setting displayed -
      I/L when ACC OFF Illumination function when ignition switch turned off / ON or OFF Customize setting displayed -
      Back Door Courtesy Switch

      Luggage compartment door courtesy light switch signal*1 / ON or OFF

      Back door courtesy light switch LH signal*2 / ON or OFF

      ON: Luggage compartment door courtesy light switch on*1

      OFF: Luggage compartment door courtesy light switch off*1

      ON: Back door courtesy light switch on*2

      OFF: Back door courtesy light switch off*2

      		 -

      *1: for Sedan

      *2: for Wagon

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System All parts illuminated by illuminated entry system ON or OFF -
      Step Light Operation* No. 1 interior illumination light ON or OFF -

      *: w/ No. 1 Interior Illumination Light