DOOR COURTESY LIGHT INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL COURTESY LIGHT BULB


    1. A003ATC

      Install the bulb.

    2. Attach the 3 claws to install the cover.

  2. INSTALL COURTESY LIGHT ASSEMBLY


    1. A003E87

      Attach the 2 claws to install the light.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A003B1K

      for Manual Seat:

      Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

    2. for Power Seat:


      1. A003DIE

        Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

      2. Connect the connector.

      3. A003C9U

        Attach the wire harness.

    3. A003BXA

      Attach the front door trim board with the 5 claws of the front door inner glass weatherstrip.

    4. Connect the courtesy light connector.

    5. A003B48

      Attach the 2 claws and 10 clips to install the trim board.

    6. Install the 3 screws.

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION


    1. Install the front door No. 1 stiffener cushion.

  5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY

    A003AO9E01

    1. Connect the connector.

    2. Attach the 7 claws and clip to install the front armrest base panel.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)

    Tech Tips

    Use the same procedure described for the driver side.

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the driver side.

  8. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    A003AO9E01

    1. Connect the connector.

    2. Attach the 7 claws and clip to install the front armrest base panel.

  9. INSTALL ASSIST GRIP COVER LH


    1. A003E1P

      Attach the 9 claws to install the assist grip cover.

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. A003D69

      Attach the 3 claws to install the inside handle bezel plug.