ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL HOOD LOCK ASSEMBLY


    1. A00OS8DE01
      Text in Illustration
      *1 MP grease

      Apply MP grease to the sliding areas of the lock.

    2. A00OW07

      Connect the hood lock control cable.

    3. A00OT18

      Connect the connector.

    4. Install the hood lock with the 3 bolts.

      Torque:
      5.5 N*m  { 57 kgf*cm, 49 in.*lbf }

  2. INSTALL NO. 1 WATER HOSE CLAMP BRACKET


    1. Connect the No. 1 water hose clamp bracket to the radiator support with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Attach the 2 hose clamps to the No. 2 by-pass water hose, and then connect the No. 1 radiator hose to the No. 1 water hose clamp bracket.

  3. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Install the radiator support opening cover with the 7 clips.