ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL HOOD LOCK ASSEMBLY


    1. A003D3FE01
      Text in Illustration
      *1 MP grease

      Apply MP grease to the sliding areas of the lock.

    2. A003DZP

      Connect the hood lock control cable.

    3. A003DMU

      Connect the connector.

    4. Install the hood lock with the 3 bolts.

      Torque:
      5.5 N*m  { 57 kgf*cm, 49 in.*lbf }

  2. INSTALL NO. 1 WATER HOSE CLAMP BRACKET


    1. A00EAT8

      Connect the No. 1 water hose clamp bracket to the radiator support with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Attach the 2 hose clamps to the No. 2 by-pass water hose, and then connect the No. 1 radiator hose to the No. 1 water hose clamp bracket.

  3. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00E83X

      Install the radiator support opening cover with the 8 clips.