ELECTRICAL KEY OSCILLATOR (for Center Floor) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL INDOOR NO. 2 ELECTRICAL KEY OSCILLATOR


    1. A003DID

      Install the electrical key oscillator with the bolt.

    2. Connect the connector.

    3. A003C0OE01
      Text in Illustration
      *1 Front Floor Carpet

      Install the front floor carpet assembly with the clip.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    A003CGQE01

    1. Attach the 2 rear hooks of the seat cushion to the seatback.

    2. Attach the 2 front hooks to install the seat cushion.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.