BACK DOOR LOCK (for Wagon) INSTALLATION


  1. INSTALL BACK DOOR LOCK ASSEMBLY

    Note


    • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

    • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.


    1. A00OJC3

      Connect the connector.

    2. Install the back door lock assembly with the 3 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A003BFT

      Attach the 14 clips to install the back door trim board.

  3. INSTALL BACK DOOR SIDE GARNISH RH


    1. A003BK6

      Attach the 2 clips and claw to install the back door side garnish.

  4. INSTALL BACK DOOR SIDE GARNISH LH


    1. A003E8M

      Attach the 2 clips and claw to install the back door side garnish.

  5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A003DA4

      Attach the 4 clips to install the upper back door trim panel