TRANSMITTER BATTERY (w/o Entry and Start System) INSTALLATION


  1. INSTALL TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. A0020L7

      Install a battery (lithium battery: CR2016) with the positive (+) side facing upWARD, as shown in the illustration.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A00230G

      install the cover.

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE

    A0022YK

  3. INSTALL TRANSMITTER HOUSING COVER


    1. A0020A0

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times.

      OK
      Transmitter's LED illuminates 3 times when switch is pressed 3 times.