TRANSMITTER BATTERY (w/o Entry and Start System) REMOVAL


  1. REMOVE TRANSMITTER HOUSING COVER

    Note

    Take extra care when handling these precision electronic components.


    1. A00DQDY

      Twist the screwdriver in the direction of the arrow in the illustration, and open the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not forcibly pry open the cover.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE

    A00DQUP

  3. REMOVE TRANSMITTER BATTERY


    1. A00DPWQ

      Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.

    2. A00DS81

      Remove the battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may cease to work.