CLEARANCE SONAR MAIN SWITCH (for LHD) REMOVAL


  1. REMOVE INSTRUMENT SIDE PANEL LH


    1. A00OT6KE01
      Text in Illustration
      *1 Protective Tape

      Place protective tape as shown in the illustration.

    2. Using a moulding remover B, detach the 3 clips and 4 claws.

    3. A00OS50

      Detach the 2 hooks and remove the side panel.

  2. REMOVE NO. 1 SWITCH HOLE BASE


    1. A00OVX0

      Using a moulding remover B, detach the 2 claws and 4 clips.

    2. Disconnect the connectors and remove the switch hole base.

  3. REMOVE BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY


    1. A003BSW

      Detach the 2 claws and remove the back sonar or clearance sonar switch.