ULTRASONIC SENSOR REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR BUMPER COVER (for Sedan)


    1. Remove the rear bumper cover Click here.

  2. REMOVE REAR BUMPER COVER (for Wagon)


    1. Remove the rear bumper cover Click here.

  3. REMOVE NO. 1 ULTRASONIC SENSOR


    1. for Wagon:

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.


      1. A00OIZ7

        Detach the 2 clamps.

      2. A00OMQU

        Disconnect the connector.

      3. A00ON9S

        Widen the No. 1 ultrasonic sensor retainer, detach the 2 claws of the No. 1 ultrasonic sensor and remove it.

    2. for Sedan:

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.


      1. A00OL44E01
        Text in Illustration
        *A for RHD
        *B for LHD

        Detach the 3 clamps.

      2. A00ONMLE01
        Text in Illustration
        *A for RH Side
        *B except RH Side

        Disconnect the connector.

      3. A00OJ3XE01
        Text in Illustration
        *A for RH Side
        *B except RH Side

        Widen the No. 1 ultrasonic sensor retainer, detach the 2 claws of the No. 1 ultrasonic sensor and remove it.

  4. REMOVE ULTRASONIC SENSOR CLIP (for RH Side and LH Side)


    1. A00ONJL

      for Wagon:

      Detach the 2 claws of the ultrasonic sensor clip from the ultrasonic sensor retainer and remove the ultrasonic sensor clip.

    2. A00OL5SE01
      Text in Illustration
      *A for RH Side
      *B for LH Side

      for Sedan:

      Detach the 2 claws of the ultrasonic sensor clip from the ultrasonic sensor retainer and remove the ultrasonic sensor clip.

  5. REMOVE ULTRASONIC SENSOR CLIP (for Center)


    1. A00ONJL

      for Wagon:

      Detach the 2 claws of the ultrasonic sensor clip from the ultrasonic sensor retainer and remove the ultrasonic sensor clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

    2. A00OJ84

      for Sedan:

      Detach the 2 claws of the ultrasonic sensor clip from the ultrasonic sensor retainer and remove the ultrasonic sensor clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

  6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    1. A00OIKW

      for Wagon:

      Detach the claw from the rear bumper cover and remove the ultrasonic sensor retainer.

    2. A00ONH1

      for Sedan:

      Detach the claw from the rear bumper cover and remove the ultrasonic sensor retainer.

  7. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. A00OMVS

      for Wagon:

      Detach the 2 claws from the rear bumper cover and remove the No. 2 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for the other No. 2 ultrasonic sensor retainer.

    2. A00OK9L

      for Sedan:

      Detach the claw from the rear bumper cover and remove the No. 2 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for the other No. 2 ultrasonic sensor retainer.

  8. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER


    1. A00OIKW

      for Wagon:

      Detach the claw from the rear bumper cover and remove the No. 3 ultrasonic sensor retainer.

    2. A00OK9L

      for Sedan:

      Detach the claw from the rear bumper cover and remove the No. 3 ultrasonic sensor retainer.