INSPECTION PROCEDURE
PROCEDURE
CHECK GPS MARK
Check that the GPS mark is displayed.
| OK |
|---|
| GPS mark is displayed. |
| NG |
|
PROCEED TO "GPS MARK IS NOT DISPLAYED" Click here |
| OK |
|
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
Enter the "Navigation Check" mode and select "Vehicle Sensors" Click here.
While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are equal or almost equal.
| OK |
|---|
| The readings are equal or almost equal. |
| NG |
|
GO TO "Speed Signal Circuit" Click here |
| OK |
|
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
Check that the display changes between ON and OFF according to the shift lever operation.
| OK | ||||||
|---|---|---|---|---|---|---|
|
Tech Tips
The display is updated once per second. It is normal for the display to lag behind the actual shift lever operation.
| NG |
|
PROCEED TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
END