STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A010PC9

      Attach the 2 claws to install the stereo jack adapter.

  2. INSTALL BOX BOTTOM PANEL


    1. A010PV6

      Attach the 4 claws to install the panel.

  3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    1. A010PTR

      Connect the connector.

    2. Attach the 2 claws and 6 clips to install the console panel.

  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A010QW2

      Attach the 2 claws and 6 clips to install the console panel.

    2. A010Q3P

      Attach the cover to the shaft.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    1. A010QEM

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A010Q4J

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Attach the 4 clips and 5 claws to install the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Connect the connector.

      2. Attach the 4 clips and 5 claws to install the panel end.

        A00OW4UE01

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)


    1. A00OSPV

      Attach the 4 clips and 5 claws to install the panel end.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00OQEVE01

  10. INSTALL NO. 3 BOX PANEL


    1. When replacing the No. 3 box panel with a new one:


      1. A010S0KE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A010QVSE02

  11. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00OW2FE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  12. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00OT9HE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.