PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE ROOF HEADLINING ASSEMBLY
for Sedan:
Remove the roof headlining Click here.
for Wagon:
Remove the roof headlining Click here.
REMOVE AMPLIFIER ANTENNA ASSEMBLY (for Sedan)
Remove all the tape and the antenna cord from the roof headlining.
REMOVE AMPLIFIER ANTENNA ASSEMBLY (for Wagon)
w/o Panorama Roof:
Remove all the tape and the antenna cord from the roof headlining.
w/ Panorama Roof
Remove all the tape and the antenna cord from the roof headlining.
REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
Remove the upper instrument panel Click here.
REMOVE DEFROSTER NOZZLE ASSEMBLY
Detach the 4 claws and remove the defroster nozzle assembly.
REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
for Connector Type:
Remove the bolt.
Disconnect the connector.
Detach the 6 clamps and remove the antenna cord.
for Plug Type:
Remove the bolt.
Disconnect the connector.
Detach the 6 clamps and remove the antenna cord.
REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
for Connector Type:
Remove the bolt.
Disconnect the connector.
Detach the 6 clamps and remove the antenna cord.
for Plug Type:
Remove the bolt.
Disconnect the connector.
Detach the 6 clamps and remove the antenna cord.